Do not connect the printer immediately, install the driver first!
How do I install and set up a Boca printer for Stager tickets?
Download the drivers from Boca Systems. And run the Windows installer.
Step 2. Configure the printer
Now connect the printer with the USB cable. The printer is set up by Windows. Then go to Settings - Devices - Printers & scanners.
Check if the printer is “Default”. If not, right click and choose "Set as default". Then click on the correct printer and choose Manage - Printing preferences.
In the next window choose "Orientation “Landscape".
Then click on "Advanced" and in the next screen choose "Ski" for paper size.
After this, you will also need to adjust the printer properties. Select the printer and then "Printer properties".
In the Paper Size option, select "Ski".
The next step is to correctly set the print settings in Google Chrome. Read here how to do that.
How can I rotate a Boca ticket 180°?
In some cases, a Boca ticket leaves the printer in exactly the wrong way, so that the barcode no longer falls along the tear line. Here’s how you can solve the problem.
There is one setting that allows the print to be rotated 180° through the printer’s driver. This setting is called ORIENTATION where you choose between 'normal' or 'reversed'. The NORMAL setting is often active (factory default). Try changing this setting to REVERSED.
More information about the orientation command can be found in this article: Change orientation setting.
Adjust printer setting ORIENTATION via control panel
Checking and adjusting the ORIENTATION setting is best done using the control panel (push buttons and display) on the printer. Follow the steps below to access and use the FACTORY MENU:
Tickets must be loaded into the printer. The LCD window will show FGL-46N# - SB# (# - numerical value depends on revision level; N# represents the software series level; B# is the font).
Press both the MENU and the CHOICES buttons simultaneously for about 3 seconds. The LCD window shows FACTORY MENU. If the buttons are held down longer, different menu items will be displayed.
NOTE: Inappropriate use of the factory menu can disable your printer.
Use the MENU key to go to ORIENTATION?.
Then use the CHOICES key to go to REVERSE.
NOTE: There is a blinking cursor behind the currently set choice.
Press TEST to select the displayed setting.
The printer displays SAVING CHANGES and reboots.
Adjust printer setting ORIENTATION using commando
You adjust the setting by sending the following command to the printer, once. For this, you will need our ‘Configure and Test’ program:
<rte>
The necessary program to do this can be found here: BOCA Printer configuration & test programs